The EX-5175-EC Sensor/Transmitter is currently in the early stages of development. It is similar in design to the EX-5100 and EX-5150-MOS, but utilizes electrochemical sensors for detection of hydrogen, oxygen and a wide range of toxic gases. This information will be updated as development of the EX-5175-EC proceeds.
The CD-1300-ST Sensor/Transmitter is currently available for monitoring carbon dioxide. This 24Vdc, 4-20mA sensor/transmitter is available in two ranges, 0-2000 or 0-5000 ppm CO2. It can be connected to any of the MX Series Controllers available from ENMET. Additional information on this product is available by contacting ENMET. Product literature will be available from this site in the near future and will be added to the literature PDF files when it is completed.
ENMET can design custom engineered gas and vapor detection systems for clients who need to monitor the contents of pipelines, ducts, process lines, storage tank headspaces, engine test cells, environmental chambers, and vehicle maintenance areas. Using diverse sensor technology such as infrared, photoization, catalytic combustion, metal oxide semiconductor (MOS), and electro-chemical, it is possible to design systems for explosive levels, CO2 and oxygen levels, VOC’s, refrigerants and chlorinated solvents, as well as common inorganic toxic gases such as CO, H2S, Cl2, NH3, NO, NO2, SO2, HCl, HF, and ozone.
Pressurized process lines can be flow-controlled to deliver a gas stream sample to our multi-sensor platform, the ProAir- 2200. Alternately, a internal sample pump panel, the GSM-60 can be used to extract a sample stream from duct work, headspaces, fuel storage areas, and environmental test chambers.
Contact ENMET for more information on products listed above.
On-site consultation by ENMET factory engineers can be arranged for developing site-specific custom-engineered gas and vapor monitoring systems. Contact Verne R. Brown, Ph.D. at ENMET Corporation, 734-761-1270.
