Creative Gas Detection Solutions

CP-10 Hazardous Gas Detection Controller

CP-10 Hazardous Gas Detection Controller

Home » Products » Controllers » CP-10 Hazardous Gas Detection Controller

CP-10 Hazardous Gas Detection Controller

Single-Channel Wall-Mount Hazardous Gas Monitor Controller

CP-10 is an economical, yet versatile single-channel controller designed for monitoring a remote 4-20 mA gas sensor/transmitter or similar device. This controller provides 24 VDC power, audio/visual alarms, alarm relays and other features. CP-10 is easy to install, designed for wall mounting and completely programmable from the front panel membrane switches.

  • User-programmable alarms and high capacity relays
  • 4-20 mA inputs & outputs
  • 100-240 VAC, 24 VDC power options
  • High-integrity polycarbonate enclosure
  • RS-485 digital communication capability
  • Designed for 24 VDC battery backup

Display: High-contrast dot matrix LCD with backlight.

Alarm Levels: Three, user adjustable

Audible Alarm: 105 dB at 30 cm (12 inches), factory set to activate at Alarm 1, user adjustable

Visual Gas Alarm: 3 Red LEDs

Visual Power/Fault: Green/Red LED

Temp. Range: 32° to 122°F (0° to 50°C)

Input, one: 4-20 mA, 2-wire, 3-wire or 4-wire (consult factory)

Outputs: Relays: 4 Form C, 10A SPDT contacts, 3 gas alarms and 1 fault

Analog: 4-20 mA

Digital: RS-485 Modbus

Power: 100-240 VAC and/or 24 VDC, 15W. Supplied with strain relief for 0.20 to 0.35 inch diametercable

Enclosure: Polycarbonate

Size, Instrument Only: 7 x 5 x 3 inches (18 x 13 x 8 cm)

Weight: 2 lbs. (0.9 kg)

  • 1-3 Butadiene (C4H6)
  • 2-Butanone (MEK) (C4H8O)
  • Acetaldehyde (CH3CHO)
  • Acetone (CH3)2CO
  • Acetonitrile (CH3CN)
  • Acetylene (C2H2)
  • Ammonia (NH3)
  • Arsine (AsH3)
  • Benzene (C6H6)
  • Boron trichloride (BC13)
  • Bromine (Br2)
  • Butane (C4H10)
  • Carbon Dioxide (CO2)
  • Carbon monoxide (CO)
  • Chlorine (Cl2)
  • Chlorine dioxide (CLO2)
  • Combustible Gas
  • Disilane (Si2H6)
  • Ethane (C2H6)
  • Ethyl alcohol (C2H5OH)
  • Ethylene (C2H4)
  • Ethylene oxide (ETO) (C2H4O)
  • Fluorine (F2)
  • Gasoline
  • Heptane (C7H16)
  • Hexane (C6H14)
  • Hydrazine (N2H4)
  • Hydrocarbons
  • Hydrogen (H2)
  • Hydrogen bromide (HBr)
  • Hydrogen chloride (HCl)
  • Hydrogen cyanide (HCN)
  • Hydrogen fluoride (HF)
  • Hydrogen sulfide (H2S)
  • Isobutane (C4H10)
  • Isobutylene (C4H8)
  • Isopropanol (CH3) CHOH
  • Isopropyl alcohol (IPA) (C3H8O)
  • Jet Fuel (JP8)
  • Kerosene
  • Methane (CH4)
  • Methanol (CH3OH)
  • Methyl alcohol (CH3OH)
  • Methyl chloride (CH3Cl)
  • Methyl ethyl ketone (MEK) (C4H8O)
  • Methylene chloride (CH2Cl2)
  • Natural Gas
  • Nitric oxide (NO)
  • Nitrogen dioxide (NO2)
  • Octane (C8H18)
  • Organic solvents
  • Oxygen (O2)
  • Ozone (O3)
  • Pentane (C5H12)
  • Phosphine (PH3)
  • Propane (C3H8)
  • Propylene (C3H6)
  • Propylene oxide (C3H6O)
  • Silane (SiH4)
  • Solvents
  • Styrene (C8H8)
  • Sulfur dioxide (SO2)
  • Toluene (C7H8)
  • Trichloroethylene (C2HCl3)
  • Vinyl chloride aka Chloroethene (VCM) (C2H3Cl)
  • Volatile Organic Compounds (VOCs)
  • Xylene (C8H10)

Calibration Equipment:

Calibration equipment for the CP-10 controller is dependent upon the type of sensor/transmitter included with the controller. Calibration equipment should be purchased according to the sensor/transmitter calibration equipment requirements.  Contact ENMET with model numbers and serial numbers of both the CP-10 and the sensor/transmitters associated with the controller when inquiring about calibration equipment.

System Options and Accessories

Several accessories can be purchased with the CP-10 controller and corresponding sensor/transmitter. Listed are some of the more common items purchased:

Part No.                 Description

04546-004            Splash Guard for EX Series: 5120, 5155, 5165, 5175 & 5185 Sensor/Transmitters

04546-005            Splash Guard for EX-5100 Sensor/Transmitters

04546-006            Splash Guard for EX-5150-MOS Sensor/Transmitters

04546-007            Splash Guard for EX-5130 Sensor/Transmitters

04546-010            Splash Guard for EX-6100 Sensor/Transmitters

04566-014            Battery Backup, 24 VDC, 24 amp/hour

62020-002            Strobe Light, Red, 12-72 VDC

62020-003            Strobe Light, Red, 120 VAC

NOTE: Other system options available, consult factory for more information.

To place an order, please contact our experienced and professional customer service team:

PHONE: 734-761-1270

If you cannot find what you need or require a custom part, simply call and speak to one of our knowledgeable gas monitoring experts. They will be able to walk you through the ordering process quickly and professionally.

Instrument                                                             Part No.

CP-10, 1-Channel Controller                                 04640-001

Sign up for our newsletter?

Stay up to date with our happenings, developments and new products!

Leave details