Creative Gas Detection Solutions

ProAir 2200 Compressed Airline Monitor

ProAir 2200 Compressed Airline Monitor

  • Continuous real-time gas monitoring of compressed airlines
  • Can be custom configured with up to 4 sensors
  • Able to withstand harsh process environments
  • User programmable alarms and relays
  • Meets Grade D breathing and NFPA 99 requirements
  • Low flow alarm
  • Field replaceable sensors

ProAir 2200 is a compact, easy to install and operate compressed airline monitor that can continuously and simultaneously monitor up to four gases in real-time using internally mounted sensors. ProAir 2200 can be custom configured to monitor a variety of hazardous gases present in compressed air, including carbon monoxide, oxygen, dew point, carbon dioxide, VOCs, trace hydrocarbons and many other gases associated with OSHA monitoring requirements for Grade D breathing air.

ProAir 2200 is ENMET’s most advanced compressed airline monitor for process or breathing air requirements. It is used in a wide variety of industrial applications from aerospace to pharmaceutical and can be easily adapted to meet your specific needs for compressed airline monitoring.

Display: High-contrast, backlit

Alarms: Visual: LEDs

Audible: Piezoelectric horn, 95 dB at 2 feet

Alarm Relays: 5 programmable gas relays plus fault.  All relays are programmable latching or nonlatching, dry SPDT, 10 amps (resistive load only) at 110 VAC.

Operating Power: 100 to 240 VAC and/or 12 VDC, 15 Watts

Inlet Pressure: Must be regulated to 55 psi (user provided)

Flow Rate: 1/2 liter per minute (1 SCFH)

Enclosure: Thermoplastic box with clear, hinged front cover, designed for NEMA 12 and 4X

Dimensions: 9.3 W x 11.9 H x 6.1 D inches (21.3 W x 30.3 H x 15.4 D cm)

Weight: 8 lbs.

Approvals: UL 60601-1, IEC 60601-1 & CSA 22.2, No. 601.1

  • Acetone (CH3)2CO
  • Acetonitrile (CH3CN)
  • Acetaldehyde (CH3CHO)
  • Ammonia (NH3)
  • Benzene (C6H6)
  • Butane (C4H10)
  • 2-Butanone (MEK) (C4H80)
  • Bromine (Br2)
  • Carbon dioxide (CO2)
  • Carbon monoxide (CO)
  • Chlorine (Cl2)
  • Chlorine dioxide (CLO2)
  • Combustible Gas
  • Dew Point (DP)
  • Ethanol (CH3CH2OH)
  • Ethyl alcohol (C2H5OH)
  • Ethylene (C2H4)
  • Ethylene oxide (ETO) (C2H4O)
  • Fluorine (F2)
  • Gasoline
  • Heptane (C7H16)
  • Hexane (C6H14)
  • Hydrocarbons
  • Hydrogen (H2)
  • Hydrogen cyanide (HCN)
  • Hydrogen sulfide (H2S)
  • Jet Fuel (JP8)
  • Isobutane (C4H10)
  • Isobutylene (C4H8)
  • Isopropanol (CH3) CHOH
  • Isopropyl alcohol (IPA) (C3H8O)
  • Kerosene
  • Methane (CH4)
  • Methanol (CH3OH)
  • Methyl alcohol (CH3OH)
  • Methyl chloride  (CH3Cl)
  • Methyl ethyl ketone (MEK) (C4H8O)
  • Methylene chloride (CH2Cl2)
  • Natural Gas
  • Nitric oxide (NO)
  • Nitrogen dioxide (NO2)
  • Nitrous oxide (N2O)
  • Organic solvents
  • Oxygen (O2)
  • Pentane (C5H12)
  • Propane (C3H8)
  • Propylene (C3H6)
  • Propylene oxide (C3H6O)
  • Solvents
  • Styrene (C8H8)
  • Sulfur dioxide (SO2)
  • Toluene (C7H8)
  • Trichloroethylene (C2HCl3)
  • Vinyl chloride aka Chloroethene(VCM) (C2H3Cl)
  • Volatile Organic Compounds (VOCs)
  • Water/Dew Point
  • Xylene (C8H10)

Calibration Equipment for ProAir 2200:

(Typical equipment for standard calibrations)

Part No.                 Description

03700-500            Gas Regulator Assembly for 34 liter steel gas cylinders, CO & O2

03700-501            Gas Regulator Assembly for 34/58 Aluminum gas cylinders, or 103 liter steel gas cylinders, CO2

03219-020            Calibration Gas, 34 liter steel cylinder, 20 ppm Carbon monoxide, CO

03296-209            Calibration Gas, 34 liter steel cylinder, 20.9% Oxygen, O2

03223-1000          Calibration Gas, 103 liter steel cylinder, 1000 ppm Carbon dioxide, CO2

73083-000            Carrying Case, will hold up to two cylinders, either 34 or 103 liter

Calibration equipment for the ProAir 2200 is available for many other gases. Contact ENMET for other calibration gases and regulator assemblies available for gases not listed above. Always provide the Model Number and Serial Number of your instrument when inquiring about calibration equipment.

To place an order, please contact our experienced and professional customer service team:

PHONE: 734-761-1270

If you cannot find what you need or require a custom part, simply call and speak to one of our knowledgeable gas monitoring experts. They will be able to walk you through the ordering process quickly and professionally.

Please contact the ENMET sales department for help designing a ProAir 2200 to meet your gas detection requirements.

To find calibration equipment for the ProAir 2200, please refer to the Accessories tab above.

Sign up for our newsletter?

Stay up to date with our happenings, developments and new products!

Leave details